Mathematical modeling of transdermal delivery of topical drug formulations in a dynamic microfluidic diffusion chamber in health and disease.

Mathematical models of epidermal and dermal transport are essential for optimization and development of products for percutaneous delivery both for local and systemic indication and for evaluation of dermal exposure to chemicals for assessing their toxicity. These models often help directly by providing information on the rate of drug penetration through the skin and thus on the dermal or systemic concentration of drugs which is the base of their pharmacological effect. The simulations are also helpful in analyzing experimental data, reducing the number of experiments and translating the in vitro investigations to an in-vivo setting. In this study skin penetration of topically administered caffeine cream was investigated in a skin-on-a-chip microfluidic diffusion chamber at room temperature and at 32°C. Also the transdermal penetration of caffeine in healthy and diseased conditions was compared in mouse skins from intact, psoriatic and allergic animals. In the last experimental setup dexamethasone, indomethacin, piroxicam and diclofenac were examined as a cream formulation for absorption across the dermal barrier. All the measured data were used for making mathematical simulation in a three-compartmental model. The calculated and measured results showed a good match, which findings indicate that our mathematical model might be applied for prediction of drug delivery through the skin under different circumstances and for various drugs in the novel, miniaturized diffusion chamber.

Microparticles and multi-unit systems for advanced drug delivery.

Microparticles have unique benefits in the formulation of multiparticulate and multi-unit type pharmaceutical dosage forms allowing improved drug safety and efficacy with favorable pharmacokinetics and patient centricity. On the other hand, the above advantages are served by high and well reproducible quality attributes of the medicinal product where even flexible design and controlled processability offer success as well as possible longer product life-cycle for the manufacturers. Moreover, the specific demands of patients can be taken into account, including simplified dosing regimens, flexible dosage, drug combinations, palatability, and ease of swallowing. In the more than 70 years since the first modified-release formulation appeared on the market, many new formulations have been marketed and many publications have appeared in the literature. More unique and newer pharmaceutical technologies and excipients have become available for producing tailor-made particles with micrometer dimensions and beyond. All these have contributed to the fact that the sub-units (e.g. minitablets, pellets, microspheres) that make up a multiparticulate system can vary widely in composition and properties. Some units have mucoadhesive properties and others can float to contribute to a suitable release profile that can be designed for the multiparticulate formula as a whole. Nowadays, there are some available formulations on the market, which are able to release the active substance even for several months (3 or 6 months depending on the type of treatment). In this review, the latest developments in technologies that have been used for a long time are presented, as well as innovative solutions such as the applicability of 3D printing to produce subunits of multiparticulate systems. Furthermore, the diversity of multiparticulate systems, different routes of administration are also presented, touching the ones which are capable of carrying the active substance as well as the relevant, commercially available multiparticle-based medical devices. The versatility in size from 1 µm and multiplicity of formulation technologies promise a solid foundation for the future applications of dosage form design and development.

Transdermal Delivery of α-Aminophosphonates as Semisolid Formulations-An In Vitro-Ex Vivo Study.

α-Aminophosphonates are organophosphorus compounds with an obvious similarity with α-amino acids. Owing to their biological and pharmacological characteristics, they have attracted the attention of many medicinal chemists. α-Aminophosphonates are known to exhibit antiviral, antitumor, antimicrobial, antioxidant and antibacterial activities, which can all be important in pathological dermatological conditions. However, their ADMET properties are not well studied. The aim of the current study was to provide preliminary information about the skin penetration of three preselected α-aminophosphonates when applying them as topical cream formulations in static and dynamic diffusion chambers. The results indicate that aminophosphonate 1a, without any substituent in the para position, shows the best release from the formulation and the highest absorption through the excised skin. However, based on our previous study, the in vitro pharmacological potency was higher in the case of para-substituted molecules 1b and 1c. The particle size and rheological studies revealed that the 2% cream of aminophosphonate 1a was the most homogenous formulation. In conclusion, the most promising molecule was 1a, but further experiments are proposed to uncover the possible transporter interactions in the skin, optimize the topical formulations and improve PK/PD profiles in case of transdermal delivery.

Review on Starter Pellets: Inert and Functional Cores.

A significant proportion of pharmaceuticals are now considered multiparticulate systems. Modified-release drug delivery formulations can be designed with engineering precision, and patient-centric dosing can be accomplished relatively easily using multi-unit systems. In many cases, Multiple-Unit Pellet Systems (MUPS) are formulated on the basis of a neutral excipient core which may carry the layered drug surrounded also by functional coating. In the present summary, commonly used starter pellets are presented. The manuscript describes the main properties of the various nuclei related to their micro- and macrostructure. In the case of layered pellets formed based on different inert pellet cores, the drug release mechanism can be expected in detail. Finally, the authors would like to prove the industrial significance of inert cores by presenting some of the commercially available formulations.

Investigation of propellant-free aqueous foams as pharmaceutical carrier systems.

Due to their light consistency and good spreadability, aqueous foams are considered as convenient and highly accepted drug carrier systems that are of great importance in the field of topical drug delivery. The production of a stable, easy to dose, preferably environmentally harmless foam formulation is challenging. Therefore, foam characterisation requires a complex approach: several tests are to be performed throughout the formulation. Our study primarily aims to investigate the quality attributes of propellant-free foam-forming additives. Throughout the research, we focused on acquiring knowledge about the properties of pharmaceutical excipients suitable for foam formulations and their effect on foam characteristics. Not only were the relative foam density, actuated foam weight and the foam collapse tendencies studied, but also the initial liquid properties. Along with surface tension determination, bubble-forming experiments were carried out. The bubble size and rate of formation, standardised by using a texture analyser, were followed by image analysis. Analysing the bubble-forming properties of dilute surfactant solutions allows assumptions on the properties of foam formed from the more concentrated solutions. The size and number of bubbles in the produced foams are related to the kinetics of single bubble formation. For comparison, commercially available medicated foams were studied.

Physicochemical analysis in the evaluation of reconstituted dry emulsion tablets.

The aim of this study was to characterize the formation of emulsions by droplet size analysis and turbidimetry during reconstitution from a solid dosage form, namely from dry emulsion systems, which carry an oil phase for poorly soluble active ingredients. For the dry emulsion systems tablets were prepared either from oil-in-water systems using a freeze-drying process or through direct compression containing the same oil and excipients. The ratios of oil to emulgents and oil to xanthan gum were equal in both methods. In the preparation methods applied, mannitol, erythritol and lactose were used as excipients and mannitol was found to be the most effective excipient based on droplet size reconstitution, turbidimetry and physical properties. Quality control involved testing the physical properties of tablets and characterizing the reconstituted emulsions.

Evaluation of drug release from coated pellets based on isomalt, sugar, and microcrystalline cellulose inert cores.

The objective of the present study was to investigate the effect of the pellet core materials isomalt, sugar, and microcrystalline cellulose on the in vitro drug release kinetics of coated sustained-release pellets as well as to evaluate the influence of different ratios of polymethacrylate copolymers exhibiting different permeability characteristics on the drug release rate. For characterization of the drug release process of pellets, the effect of osmolality was studied using glucose as an osmotically active agent in the dissolution medium. The pellet cores were layered with diclofenac sodium as model drug and coated with different ratios of Eudragit RS30D and Eudragit RL30D (ERS and ERL; 0:1 and 0.5:0.5 and 1:0 ratio) in a fluid bed apparatus. Physical characteristics such as mechanical strength, shape, and size proved that the inert cores were adequate for further processing. The in vitro dissolution tests were performed using a USP Apparatus I (basket method). The results demonstrated that, besides the ratio of the coating polymers (ERS/ERL), the release mechanism was also influenced by the type of starter core used. Sugar- and isomalt-type pellet cores demonstrated similar drug release profiles.

[Application of computer image analysis for characterization of pellets]. / Számítógépes képanalízis alkalmazása gyógyszeres pelletek jellemzésére.

The morphological characteristics of pellets are critical parameters, because of their physico-chemical features depend on the size, shape and surface geometric of the particles. To ensure the spherical shape and required particle of pharmaceutical pellets size is a prerequisite. The detailed technology is basic requirement for the successful and cost efficient production of particles of acceptable quality. Since the determination of the particle size is influenced by the particle shape, therefore microscopic examination is always suggested, which together with image analysis is suitable for the assesment of the most typical parameters. The method of the microscopic image analysis is useful not only for particle size measurement, but also for particle shape and texture evaluation, with a high sensitivity. Using the microscopic method particle shape may be defined either qualitatively and quantitatively. Reviewing the related articles and results on the investigation of sugar pellets demonstrate that roundness characterization is strongly influenced by the applied statistical shape parameters.

[Importance of dissolution profile in stability tests]. / A kioldódási profil jelentosége a stabilitási vizsgálatokban.

The aim of stability testing lies in its possibility of revealing all the effects that may influence the quality, efficacy and safety of a pharmaceutical preparation. The stability of a dosage form means that the release of the active ingredients remains unchanged or within specific limits. The manner of stability testing is regulated by guidelines, which consist of -- besides the regular tests of the active ingredient and the degradation products, the concerning impurities, the water content, the hardness -- the dissolution tests. Most physical changes influence the drug release in vivo, which can -- in vitro -- be followed by dissolution.

[Example for a new alternative application of NIR spectroscopy in the parallel determination of active ingredients and an excipient in powders and tablets]. / Példa a NIR spektroszkópia alternatív alkalmazhatóságára: porkeverékek es tabletták komponenseinek egyideju meghatározása.

Near infrared reflectance (NIR) spectroscopy was used to determine paracetamol, caffeine and lactose based excipient content of powders for direct compression and in intact tablet formulations as well. The nominal concentrations of the active moiety was different in each sample set, and calibration was carried out by multiple linear regression calculations from the reflectance spectral data. The results obtained with NIR spectroscopy were comparable with those obtained with high-performance liquid chromatography (HPLC) used as reference method. The non-destructive NIR method applied is thus suitable for the alternative quantitative determination of paracetamol, caffeine and additionally the excipient in intact tablets and have the advantage over HPLC of being rapid and can be simply carried out without sample preparation and without the use of any reagent.